Verint Nextiva S1700e Series Uživatelská příručka Strana 36
- Strana / 95
- Tabulka s obsahem
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
2: Configuring and Installing the Device
24 Verint Video Solutions
To set the QoS values, you need to go in the command line
interface (CLI) of the device, access the Advanced menu, then
the Quality of Service menu. For the procedure to access the
CLI, see page 57.
à
Status LED
The system status LED is a bicolor (green-red) LED providing
detailed information on the current state of the device.
* At least one of them must be transferred to obtain the LED
condition.
The following power-up conditions on the system status LED
are abnormal:
LED not lit—Check the power supply and cabling. If power
is available and the LED stays off, call Verint Video
Solutions customer service for assistance.
Steady red LED persisting more than 10 seconds—There is
an internal error that prevents the device from starting
normally. Power down the device, wait 30 seconds, then
power it up. If the condition persists, call Verint Video
Solutions customer service.
Condition Indication
Steady red for 5 sec. The device is powering up.
Flashing red (1 sec.
intervals)
The IP address of the device is already
assigned to another device on the network.
Flashing green (3 sec.
intervals)
The firmware has started, but the device is
not connected to the network.
Flashing green (1 sec.
intervals)
The firmware has started, the device is
connected to the network, but no
video/audio/serial* data is transmitted.
Flashing green
(0.2 sec. intervals)
The firmware has started, the device is
connected to the network, and
video/audio/serial* data is transmitted.
Three consecutive red
blinks every 2 sec.
No video source is detected and no video is
transmitted.
Flashing green-red
(1 sec. intervals)
The device is undergoing a firmware update.
Flashing red (0.1 sec.
intervals)
The device is being identified.
- Nextiva S1700e 1
- Series User Guide 1
- User Guide 3
- Contents 5
- S1700e series edge devices 7
- Who Should Read this 8
- How to Use this Guide 8
- Conventions 9
- Related Verint Video 10
- Solutions Products 10
- About Us 10
- Warranty 11
- Overview 13
- About the S1700e Series 14
- Casing Description 16
- Shipment 16
- Verint Video Solutions 5 17
- 6 Verint Video Solutions 18
- Configuring and 19
- Installing the 19
- Configuring the Device 20
- DATA & PWR 21
- Preparing a 12V DC Device 22
- Setting Device Parameters 22
- Verint Video Solutions 11 23
- 12 Verint Video Solutions 24
- Using the Encoders 25
- Performing a Point-to-Point 25
- Connection 25
- 14 Verint Video Solutions 26
- Installing the Device 27
- Performing Serial 28
- Connections 28
- RS-422/485 29
- Multidrop Configurations 30
- Configuring the I/Os 31
- Audio Input/Output Types 32
- Audio Out 33
- Updating the Firmware 34
- Performing a Hardware 34
- Red/Blue Display 35
- Activating Quality of 35
- Status LED 36
- Verint Video Solutions 25 37
- 26 Verint Video Solutions 38
- Using the Web 39
- Interface 39
- Getting Started 40
- Verint Video Solutions 29 41
- Access Management 43
- 3: Using the Web Interface 44
- 32 Verint Video Solutions 44
- Security 45
- System Status 46
- Verint Video Solutions 35 47
- 36 Verint Video Solutions 48
- Encoders 49
- 38 Verint Video Solutions 50
- Verint Video Solutions 39 51
- 40 Verint Video Solutions 52
- System Time 53
- HTTP (Webserver) 54
- Viewing Live Video 55
- Presentation Windows 56
- PTZ Controls 57
- PTZ cameras 58
- Factory Default 59
- Configuration 59
- DTE and DCE 61
- Data Terminal Equipment 62
- Data Communication Equipment 63
- Connecting DTE and DCE 63
- 52 Verint Video Solutions 64
- DHCP Support 65
- C: DHCP Support and APIPA 66
- 54 Verint Video Solutions 66
- Audio Pinouts 67
- D: Audio Pinouts 68
- 56 Verint Video Solutions 68
- CLI Access 69
- Network Connection 70
- Serial Connection 71
- 60 Verint Video Solutions 72
- RJ-45 Ethernet 73
- F: RJ-45 Ethernet Cables 74
- 62 Verint Video Solutions 74
- Technical 75
- Specifications 75
- 66 Verint Video Solutions 78
- Glossary 79
- 68 Verint Video Solutions 80
- Verint Video Solutions 69 81
- 70 Verint Video Solutions 82
- Verint Video Solutions 71 83
- 72 Verint Video Solutions 84
- Verint Video Solutions 73 85
- 74 Verint Video Solutions 86
- Compliance 91
- 80 Verint Video Solutions 92
- Declaration of Conformity 93
- 82 Verint Video Solutions 94
- Verint Video Solutions 95
- 1800 Berlier Street 95
- Laval (Quebec) 95
Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Verint Nextiva S1700e Series
(111 stránky)© 2020, manymanuals.cz. Všechna práva vyhrazena. | 0.072 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce