Verint Nextiva S1700e Series Uživatelská příručka stáhnout pdf (Strana 21)

Nextiva S1700e Series User Guide

Verint Video Solutions 9

To assemble the PoE kit:

1. In a lab, unpack the device and its PoE injector and place

them on a table.

2. Plug a straight-through Ethernet cable into the LAN 10/100

connector on the front of the S1700e device.

Note: The maximum length of this cable is 164 feet

(50 meters).

3. Plug the other end of the cable into the DATA & PWR port of

the injector.

4. Connect a second Ethernet cable (straight-through or

crossover) into the DATA port of the injector.

The crossover cable is to directly connect the device to a

computer; the straight-through cable is to integrate the

S1700e on a network. For their detailed pinouts, see

page 61.

Note: The maximum length of this cable is 82 feet

(25 meters).

5. Connect the other end of the second cable into an Ethernet

device (for example, a switch) or a computer.

Warning: To avoid damaging your Ethernet equipment,

ensure that the cable is connected into the DATA

port of the PoE injector, and not in the

DATA & PWR port.

3 4

DATA

DATA & PWR

Power cord

PoE injector

Straight-through

Ethernet cable

(straight-through

or crossover)

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 94 95

Žádné komentáře

Verint Nextiva S1700e Series Uživatelská příručka Strana 21