Verint Nextiva S1700e Series Uživatelský manuál stáhnout pdf (Strana 60)

3: Updating Firmware

48 Verint Video Solutions

Performing the Update

Updating a device retains its complete configuration.

Depending on the device, the available firmware update

methods are:

You should take into consideration the following facts regarding

firmware update using the IP network:

 It can be deactivated in the CLI. For more information,

refer to the user manual of the device.

 Ensure that the IP link is stable before starting the

procedure; therefore it is not recommended to perform it

over the Internet.

If the firmware update over the IP network fails:

 S1000w, S1500e, S1502e, and S1600e: The device turns in

backup mode, which requires a firmware update with a

serial port connection (see page 50).

 S1100w: Do not reboot the device, and restart the

procedure through the IP network as soon as possible. If

you reboot the device before proceeding with the update

procedure, it will stop responding and you will have to

upgrade its firmware using the serial port.

 S1504e, S1508e, S1700e series, S1708 series, and

S2500e: Restart the procedure. If the problem persists,

move the device so that it is in the same IP subnet as the

host computer.

Device IP connection Serial connection

S1000w

S1100w

S1500e

S1502e

S1504e

S1508e

S1600e

S1700e series

S1708e series

S2500e

S3100

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 98 99

Žádné komentáře

Verint Nextiva S1700e Series Uživatelský manuál Strana 60