Verint Nextiva S1700e Series Uživatelský manuál Strana 53

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 99
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 52
SConfigurator User Manual
Verint Video Solutions 41
The serial port settings are:
Baud Rate—The data rate that the serial equipment
operates at. Possible values range from 1200 bps to
230,400 bps (transmitters) or to 115,200 bps (receivers).
Parity—Odd, even, or no parity check. Most communication
devices do not use parity.
RS-422/485 Mode—The way the RS-422/485 serial
equipment will interface with the Nextiva device. The
supported operating modes are: RS-422 4 wires,
RS-485 2 wires, and RS-485 4 wires. Obviously, this
setting only applies to an RS-422/485 port.
For more information about these settings, refer to the serial
equipment documentation or contact your product
manufacturer.
To change the serial port settings:
1. For an S1000w or S1100w device, click Serial Port in the
parameter tree.
2. For an S1500e series, S1600e, S1700e series, and S1708e
series device, expand the Serial Port structure, then click
the desired serial port.
Zobrazit stránku 52
1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 98 99

Komentáře k této Příručce

Žádné komentáře