Verint Nextiva S1700e Series Uživatelská příručka Strana 40

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 111
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 39
3: Configuring and Installing the Device
24 Verint Video Solutions
For example, here is an S1100w transmitter connected to a PTZ camera in an RS-422
2-wire context:
For a two-wire, half-duplex RS-485 connection:
1. Use the following wiring scheme:
2. Set the line driver to the 485h-f value (see page 33).
RS-232
For an RS-232 connection, use the following wiring scheme to plug the device to the
peripheral, using the DB-9 connector on the CAB9P cable:
Cable Peripheral
Signal name Wire pair Wire color Signal name
Data+ green/black green Data+
Data- black Data-
Signal ground brown/black brown Signal ground
Signal ground black Signal ground
DB-9 pin number Cable signal name
2RxD
3TxD
5 Signal ground
7RTS
8CTS
Status
Signal ground
(brown and black)
Coax cable
BNC barrel
connector
Target device (PTZ)
Power (red and black)
Tx+ / Tx-
(yellow and black)
Rx+ / Rx-
(green and black)
Rx+ / Rx-
Signal ground
Zobrazit stránku 39
1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 110 111

Komentáře k této Příručce

Žádné komentáře