Verint Nextiva S1700e Series Instalační příručka stáhnout pdf (Strana 22)

2: Configuration and Installation

12 Verint Video Solutions

Preparing a 12V DC Device

To prepare a 12V DC device for configuration:

1. In a lab, unpack the S1700e and place it on a table.

2. Establish the Ethernet connection by plugging a cable (crossover or

straight-through) into the LAN 10/100 connector on the front of the

device.

The crossover cable is to directly connect the device to a computer;

the straight-through cable is to integrate the S1700e on a network.

Warning: Never plug a PoE injector into the LAN 10/100 connector

on an S1700e-12VDC device. Otherwise, the device will be

damaged and the warranty becomes void.

3. Power the device. If you are using the supplied power supply:

a. Plug the power supply wire with the dashed white lines in the

GND pole on the back of the device.

b. Plug the other power wire in the +12V pole on the back of the

device.

c. Connect the electric plug into the outlet.

For any other power supply, refer to the manufacturer documentation

for the proper wiring scheme.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 38 39

Žádné komentáře

Verint Nextiva S1700e Series Instalační příručka Strana 22